Setting The Time/Date; Setting The Fan; Setting System Mode - Honeywell TH8320R1003 Installation Manual

Setting the Time/Date

1. Touch the current time. The screen displays Select Option.
2. Touch Time or Date, then touch Select.
Select Option
Time
3. Touch or until the proper time/date is displayed.
 
4. Touch Done to save or Cancel to ignore changes.
Please Set Time
6
5. Touch Home to redisplay the Home screen.
NOTE: The date is not shown on the home screen; how-
ever, it should be set to allow the thermostat to
adjust time automatically for daylight saving time
and for other features such as vacation hold.

Setting the Fan

1. Touch FAN to display fan settings.
MCR34092
Fig. 80.
Date
MCR34155
Fig. 81.
:30 PM
MCR34094
Fig. 82.
MCR34096
Fig. 83.
2. Touch On, Auto, Circ, or Follow Schedule.
3. Touch Done to save and exit.
• On: Fan is always on.
• Auto: Fan runs only when heating or cooling system is
on.
• Circ: Fan runs randomly, about 35% of the time
(residential only).
• Follow Schedule: Fan controlled by program.
On
NOTE: In commercial use, touch Auto or On to temporar-
ily override the programmed fan schedule.

Setting System Mode

1. Touch SYSTEM to display system settings.
2. Touch desired option
• Heat: Controls only the heating system.
• Cool: Controls only the cooling system.
• Off: Heating/cooling systems are off.
• Auto: Selects heating or cooling depending on the
indoor temperature.
• Em Heat (heat pumps with aux. heat): Controls
auxiliary/emergency heat. Compressor is locked out.
Heat
3. Touch Done to save and exit.
NOTE: The Auto and Em Heat system settings may not
appear, depending on how your thermostat was
installed.
61
®
VISIONPRO 8000 WITH REDLINK™
Auto Circ
MCR34097
Fig. 84.
MCR34098
Fig. 85.
Cool Auto
Off
MCR34099
Fig. 86.
68-0312—03