Temperature Display And Setting - Honeywell RLV3120 Owner's Manual

Hg
N O M E R C U RY
SUPPLIED PARTS
One (1) thermostat
•
Two (2) 6-32 mounting screws
•
Two (2) solderless connectors
•

Temperature display and setting

Appears when the
setpoint is displayed
Temperature display
Heating intensity
indicator
(No image appears
when heating is off.)
The thermostat normally displays the actual (ambient) temperature.
To view the setpoint temperature, briefly press the Up or Down button. The
•
setpoint will be displayed for 5 seconds.
To change the setpoint temperature, press the Up or Down button until the
•
desired value is displayed.
ATTENTION: MERCURY RECYCLING NOTICE
This product does not contain mercury. However,
this product may replace a product that contains
mercury. Mercury and products containing
mercury should not be discarded in household
trash.
For more information on how and where to
properly recycle a thermostat containing
mercury in the United States, please refer to the
Thermostat Recycling Corporation at
www.thermostat-recycle.org.
For mercury thermostat recycling in Canada,
please refer to Switch the Stat at
www.switchthestat.ca
2
Up button
Down button