Electrical Safety - Fuji Xerox DocuPrint C3290 FS User Manual

Electrical Safety

This product shall be operated from the type of electrical supply indicated on the product's data plate label.
If you are not sure that your electrical supply meets the requirements, please consult your local power
company for advice.
WARNING: This product must be connected to a protective earth circuit.
This product is supplied with a plug that has a protective earth pin. This plug will fit only into an
earthed electrical outlet. This is a safety feature. To avoid risk of electric shock, contact your
electrician to replace the electrical outlet if you are unable to insert the plug into it. Never use an
earthed adapter plug to connect the product to an electrical outlet that lacks an earth connection
terminal.
Improper connection of the equipment-grounding conductor can result in an electric shock.
Plug the power cord directly into a grounded electrical outlet easily accessible. Do not use an
extension cord, a multi-plug adaptor or a multiple connector. It may cause the outlet to overheat and
cause fire. Ensure to operate the machine on a sole-use receptacle.
If you do not know whether an outlet is grounded, consult a qualified electrician.
This equipment is to be used on a branch circuit or outlet that has larger capacity than rated ampere
and voltage of this machine. See data plate on the rear panel for the rated ampere and voltage of this
equipment.
Never touch a power cord with wet hands. Danger of electric shock exist. It can cause electric shocks.
Do not place objects on the power cord.
Always ensure the plug connection is free of dust. In a damp environment, a contaminated connector
can draw a significant amount of current that can generate heat and eventually cause fire over an
extended period of time.
Only use the power cord supplied with the equipment.
Do not use it on any other power source, doing so can cause fire, electric shocks or machine faults.
Using a different power cord may cause fire or electric shock. Do not use power cord supplied with
the equipment on any other equipment.
Do not attempt to rework, pull, bend, chafe, or otherwise damage the power cord. A damaged cord
can cause fire or electric shocks.
If the power cord is broken or insulated wires are exposed, ask your Fuji Xerox Customer Support
Centre for a replacement. Using A damaged cord can cause fire or electric shocks.
Before cleaning this product, ensure to switch off and unplug the product from the electrical outlet.
Access to a live machine interior can cause electric shocks.
1-3
Safety Notes