Fuji Xerox DocuPrint C3290 FS User Manual page 198

Symptom
Stray black dots or white
areas (drop outs)
Vertical black or color
streaks
Recurring smudges
Toner smears when rubbed
Reason/Action
The paper is outside the recommended specification range.
Replace the paper with a recommended size and type, and confirm that your control
panel settings are correct. See
The transfer unit is old or damaged.
Replace the transfer unit.
The print cartridges are not genuine print cartridges.
Check the condition of the print cartridge, and replace as necessary.
■
Verify that the print cartridges (C/M/Y/K) are genuine cartridges, and replace if
■
necessary.
Multiple colored streaks or lines:
The transfer unit, or fuser, is old or damaged.
■
Check the condition of the transfer unit and fuser, and replace as necessary.
The print cartridges are not genuine print cartridges.
■
Verify that the print cartridges (C/M/Y/K) are genuine cartridges, and replace if
necessary.
Streak in only one color:
Check the condition of the print cartridge, and replace as necessary.
Verify that the print cartridges (C/M/Y/K) are genuine cartridges, and replace if
necessary.
Dirt in the paper path.
Print several blank sheets.
The paper is outside the recommended specification range.
Replace the paper with a recommended size and type, and confirm that your control
panel settings are correct. See
The transfer unit, or fuser, is old or damaged.
Check the condition of the transfer unit and fuser, and replace as necessary.
The paper is damp.
Replace the paper. See About Paper
The paper is outside the recommended specification range.
Replace the paper with a recommend size and type, and confirm that your print driver
settings are correct. See About Paper
The print cartridges are not genuine print cartridges.
Verify that the print cartridges (C/M/Y/K) are genuine cartridges, and replace if
necessary.
The fuser is old or damaged.
Replace the fuser.
10-19
About Paper on page 5-6.
About Paper on page 5-6.
on page 5-6.
on page 5-6.
Print Quality