Print Quality; Print-Quality Problems - Fuji Xerox DocuPrint C3290 FS User Manual

Print Quality

This section includes:
■

Print-Quality Problems

Copy-Quality Problems
■
■ Color Registration
Print-Quality Problems
When the print quality is poor, select the closest symptom from the following table to correct the problem.
If the print quality does not improve after carrying out the appropriate action, contact Fuji Xerox local
Representative Office or Authorised Dealers.
Symptom
Faded printouts
on page 10-18
on page 10-22
on page 10-23
Reason/Action
Multiple colors faded:
The print cartridges are not genuine print cartridges.
■
Verify that the print cartridges (C/M/Y/K) are genuine cartridges, and replace if
necessary.
The paper is outside the recommended specification range.
■
Replace the media with a recommend size and type, and confirm that your
control panel settings are correct. See
The paper is damp.
■
Replace the paper. See
The transfer unit is old or damaged.
■
Replace the transfer unit.
The high-voltage supply is defective.
■
contact Fuji Xerox local Representative Office or Authorised Dealers.
Only one color faded:
Check the condition of the print cartridge, and replace as necessary.
About Paper
About Paper on page 5-6.
10-18

Print Quality

on page 5-6.