Adjusting Copying Options
This section includes:
■
Basic Settings
on page 6-3
Image Adjustments
■
■
Image Placement Adjustments
■
Output Adjustments
Basic Settings
You can change the following basic settings when making copies:
Selecting Color or Black&White Copies
■
■
Selecting a Tray to Use for Copies
■
Selecting the Default Copy Settings
■
Specifying 2-Sided Copies
■
Selecting the Default Copy Settings
Selecting Color or Black&White Copies
You can create copies in color or in black-and-white.
1.
Press the Copy button.
2.
Press the Color Mode button on the control panel to change the selection to Color or B&W (black-
and-white).
Note:
The Color Mode will return to the default setting after the Copy job is complete. To set the
default behavior permanently, see
on page 6-6
on page 6-9
on page 6-12
on page 6-3
on page 6-4
on page 6-5
on page 6-5
on page 6-5
Selecting the Default Copy Settings
6-3
Adjusting Copying Options
on page 6-5.