Messages About The Printer And Other Items - Fuji Xerox DocuPrint C3290 FS User Manual

Table of Contents

Advertisement

Messages About the Printer and Other Items

Message
Printer Too Hot
Error 042-700
Cooling down
Please Wait...
Insert Tray 2
Controller Error
Error 116-327
-328
and
Restart Printer
Disabled Func
Error 016-758
Press OK
Door A Open
Close Door A
Fan Motor Error
Error 042-3NN
Restart Printer
Fuser Error
Error 010-397
Error Code: xx
Restart Printer
Invalid Job
Error 016-799
Press OK
Invalid User
Error 016-757
Press OK
Jam at Tray 1
Check Tray 1
Open Door A
Limit Exceeded
Error 016-759
Press OK
Condition/Reason/Action
The printer's internal temperature is too high.
The printer has been stopped. Wait 1 hour before restarting the printer.
Ensure the printer has adequate cooling space around it, and that the
cooling vents are not blocked.
Tray 2 is pulled out.
Push Tray 2 into the correct position.
An internal controller error occurred.
Restart the printer.
The function that you are trying to access has been disabled.
Enable the function through the control panel menus, or contact your printer
administrator. See
Using the Control Panel Menus and Keypad
page 9-1.
The front cover is open.
Close the front cover.
An error has occurred with the fan.
Restart the printer. If the error continues, contact Fuji Xerox local
Representative Office or Authorised Dealers.
A fuser error has occurred.
Restart the printer. If the error continues, contact Fuji Xerox local
Representative Office or Authorised Dealers.
When the configuration of the printer on the print driver does not conform to
the printer you are using, this message appears.
Press the Stop button to cancel the print job.
Make sure that the configuration of the printer on the print driver conforms
to the printer you are using.
The user is not registered to print on the printer when using an
authentication function.
Contact the administrator.
Paper is jammed inside Tray 1 (MPT).
Remove the jammed paper. Open and close the front cover. See
Jams
on page 10-2.
The user has exceeded the limit on the number of pages that can be printed
when using an authentication function.
Contact the administrator.
10-32
Control Panel Error Messages
on
Paper

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents