Scanning To A Computer On A Network - Fuji Xerox DocuPrint C3290 FS User Manual

Scanning to a Computer on a Network

If you haven't created a shared folder and an address for the printer to use, see
Computer on page 7-6.
To scan to a computer on a network:
1. On the control panel, click the Scan button.
2. Use the Up Arrow to select
3. Select , and then press the OK button.
Scan to
4. Press the Up Arrow or Down Arrow button to select the address that points to your computer, and
then press the OK button.
5. If you want to change any other scan settings, press the Up Arrow or Down Arrow button to select the
setting and make your changes.
6.
Press the Start button.
The printer begins scanning your documents to the shared folder on your computer.
See also:
Adjusting Scanning Options
, and then press the OK button.
Computer (Network)
on page 7-18
7-10
Scanning to a Computer on a Network
Setting Up Scanning to a