Changing Menu Settings - Fuji Xerox DocuPrint C3290 FS User Manual

Changing Menu Settings

Changing the Power Saver Time
In this example, you set the transitional time to the Power Saver Mode. For more information on the power
saver modes, see Power Saver Modes
1. To display the
Setup
2.
Press the Up Arrow or Down Arrow button until
Arrow or OK button.
3. Press the Up Arrow or Down Arrow button until
Forward Arrow or OK button.
4.
Press the Up Arrow or Down Arrow button until
Forward Arrow or OK button.
5. Select
Mode 1 (Printer)
6. Press the Up Arrow or Down Arrow button to change the number of minutes that the printer will wait
before entering the Power Saver mode.
7.
Press the OK button to confirm your settings.
Note: If you want to change values after you have confirmed them by pressing the OK button, you need to
set them from the start again.
on page 2-10.
screen, press the System button on the control panel.
or
Mode 2 (System)
Admin Menu appears, and then press the Forward
System Settings
Power Saver Timer
, and then press the OK button.
9-3
Control Panel Menus
appears, and then press the
appears, and then press the