Fuji Xerox DocuPrint C3290 FS User Manual page 112

Setting Auto Exposure
Papers that are "less-white", newsprint or ivory colored for example, can cause the printer to put toner on
the page so that the printed output has a background that matches the original. The Auto Exposure setting
removes the light or close to white color and only the image itself is printed. Auto Exposure is turned on by
default.
Turning Auto Exposure On/Off
To turn Auto Exposure on/off:
1.
On the control panel, press the System button.
2.
Select
Default Settings
3.
Select
Copy Defaults
4.
Select
Auto Exposure
5.
Press the Up Arrow or Down Arrow button to select
Setting the Auto Exposure Level
To set the auto exposure level manually:
1. On the control panel, press the System button.
2.
Select
Default Settings
3.
Select Copy Defaults
4.
Select Auto Exposure Level
5.
Press the Up Arrow or Down Arrow button to select the Auto Exposure level, and then press the OK
button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
, and then press the OK button.
or , and then press the OK button.
On Off
6-8
Adjusting Copying Options