Printing Glossy Paper - Fuji Xerox DocuPrint C3290 FS User Manual

Printing Glossy Paper

Glossy paper can be printed from any tray. It can be printed on both sides.
To order paper, transparencies, or other specialty media, contact Fuji Xerox local Representative Office or
Authorised Dealers.
Guidelines
■ Do not open sealed packages of glossy paper until you are ready to load them into the printer.
■ Leave glossy paper in the original wrapper, and leave the packages in the shipping carton until ready to
use.
■ Remove all other paper from the tray before loading glossy paper.
■ Load only the amount of glossy paper you are planning to use. Do not leave glossy paper in the tray
when you are finished printing. Reinsert unused glossy paper in the original wrapper and seal.
■ Rotate stock frequently. Long periods of storage in extreme conditions can cause glossy paper to curl
and jam the printer.
Printing Glossy Paper from Tray 1 (MPT)
1. Gently pull open the Tray 1 (MPT) cover and open the paper guides.
2.
Fan the glossy paper to release sheets that are stuck together.
3.
Insert the glossy paper into Tray 1 (MPT), and adjust the paper guides to fit the paper.
5-34
Printing on Specialty Media