Electrical Safety - Fuji Xerox ApeosPort-V C3320 Quick Reference

1 Before Using the Machine

Electrical Safety

This product shall be operated by the power source as indicated on the product's
data plate. Consult your local power company to check if your power source meets
the requirements.
1
10
To prevent electric shock and a fire accident due to electric leakage, always
connect the ground wire first to either of the followings. The ground wire is
green and comes out with the power cord from the rear panel of the product.
 Ground terminal on a wall outlet
 Copper blade nailed deeper than 850 mm into the earth.
 Ground terminal which had Type D grounding construction
Be sure to connect the ground wire first before plugging in. Conversely,
unplug first when disconnecting the ground wire.
Check a wall outlet and its grounding for the product. If no grounding is
available, contact Fuji Xerox Customer Support Center.
Never connect the ground wire to the followings:
 Gas supply tube (which may cause an ignition or explosion.)
Grounding for telephone line or a lightning arrester. (If a lightning strikes,

large current may go through.)
 Water supply tube or faucet. (If any plastic is used in a tube or faucet, it
does not work as a grounding.)
Insufficient ground connection may cause an electric shock.
To prevent electric shock and a fire accident due to electric leakage, provide
Type D or better grounding construction to this product.
Plug the power cord directly into a grounded electrical outlet. To prevent
overheat and a fire accident, do not use an extension cord, a multi-plug
adaptor or a multiple connector. Consult Fuji Xerox Customer Support Center
to check if an outlet is grounded.
Connect this product to a branch circuit or an outlet that has larger capacity
than the rated ampere and voltage of this product. See the data plate on the
rear panel of this product for its rated ampere and voltage.
Never touch the power cord with wet hands. It may cause electric shock.
Do not put an object on the power cord.
Always keep the plug connection free of dust. The dusty and damp
environment may bring about minute electric current in a connector. It may
generate heat and eventually cause a fire accident.