Aileron Differential - FUTABA 6K Instruction Manual

Aileron differential

AIL DIF
Function
Two servos can be used for ailerons and a
differential can be applied to left and right aileron
operation. The left and right aileron differential can
be adjusted independently. This function is restricted
to 2 servo aileron.
Connect the left aileron to CH1 (AIL) and the right
aileron to CH6.
●The up and down angle of the left and right aileron
control surface can be adjusted individually.
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
（1 second）
Aileron 1 （ CH1） rate
Aileron 6 （ CH6） rate
● Select the setting item with
the Jog key.
Aileron Differential
■ Activating the function
① Select the "2AIL" or "2AIL1FLP"
"2AIL2FLP" by WING type (MDL
TYP).
WING TYPE 1AIL
Aileron 1
(CH1)
② Select "AIL DIF"
from the menu with the
Jog key.
Select the Left/Right with the
aileron stick .
■ Aileron rate
② Select the "AIL1" item and move the
aileron stick to the left and right and
adjust the travel of each servo by
pressing the + key or – key.
Range：-120 ～ +120%
Default：+100%
● When you want to return to the initial value, press the + key
and – key simultaneously. However, when the polarity is
changed only the number returns to the initial value.
（Adjust the "AIL6" item in the same way as ② .）
1AIL1FLP 2AIL 2AIL1FLP 2AIL2FLP
Aileron 6
(CH6)
③ Open the setting screen by
pressing the Jog key.
（Aileron rate）
L：Aileron Stick Left side rate
R：Aileron Stick Right side rate
＋
(GLIDER)
－
or
141