Gyro Sensor - FUTABA 6K Instruction Manual

GYRO
Function
This function is dedicated mixing for switching
the gyro sensitivity and gyro mode (AVCS/
NORMAL) of Futaba airplane use gyros.
●The sensitivity switch can be selected and the
sensitivity of each direction of the switch can be
set. (Switches A to D) If the airplane stalls during
flight, the gyro will lose control of the plane's
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
Each switch position
Gyro type / Gain rate
● Select the setting item
with the Jog key.
GYRO setup
■ Activating the function
① Select the "MIX" item
a n d t h e n s e l e c t t h e
"ON" by pressing the +
key or – key.
● When you do not use a function, set to the
"INH" side.
■ Gyro mode and gain setting
③ UP, CNT, DWN, shows the switch position. Set the respective positional gain and mode.
When a ＋ key is
pressed, gain of the
AVCS side is UP.
140

Gyro sensor

② Select
（1 second）
（Gyro type）
＋
or
AVC 100%
AVCS
＋
WING TYPE 1AIL
attitude. From the standpoint of safety, we
recommend that the OFF (0%) position also be set
using a 3 position switch.
"GYRO"
from the menu with the
Jog key.
（Gyro Gain）
■ Gain switch selection
② Select the "SW" item and then select the
－
switch by pressing the + key or – key.
Range：SwA ～ SwD Default：SwB
GAIN=OFF
0%
Normal
－
1AIL1FLP 2AIL 2AIL1FLP 2AIL2FLP
③ Open the setting screen by
pressing the Jog key.
● When not using this function,
select INH.
Gain switch selection
（C u r r e n t s w i t c h o p e r a t i n g
direction）
● S w i t c h e s t o t h e
s e n s i t i v i t y s e t t i n g
screen of each switch
direction when the
Jog key is pressed.
＋ －
or
NOR 100%
When a － key is
pressed, gain of the
Normal side is UP.
(GLIDER)