Trim; Trim - FUTABA 6K Instruction Manual

Trim reset ／ Trim step

TRIM

Function
Trim Step
The amount of trim change per step can be
changed between 1 and 40 according to the aircraft
capacity and trim application.
Set it to match the application. With ordinary
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the + key
for 1 second.
＋
（1 second）
Trim step
● Select the item with the
Jog key.
● For example, when the step size is the initial value (4), trim movement from
center to end is 30 steps. If the step size is made 40, the trim moves 3 steps.
Trim step
① Select the trim you want to set from the STEP item
and set the step size by pressing the + key or – key.
＋
Trim type
① Select the trim you want to set from the TYPE item
and set the trim type by pressing the + key or –
key.
＋
② Select
from the menu with the Jog
key.
（Trim step rate）
－
or
－
or
aircraft, a setting of about 2 to 10 should be fine.
(Initial value: 4)
Trim Type
The amount of trim change trim type can be
changed between NOR (normal), ATL and CNT
(center) according to the trim application.

"TRIM"

③ Open the setting screen by
Range：1 ～ 40
Default：4
● When you want to return the
set value to the initial value,
p r e s s t h e + k e y a n d – k e y
simultaneously.
Range：NOR,
CNT(Besides THR),
ATL (THR)
(Common)
pressing the Jog key.
TRIM (Besides THR) NOR ⇔ CNT
CNT : With the center trim feature,
trim adjustments have no
effect on the maximum servo
travel. This prevents the
linkages from binding when
adjustments are made.
THR TRIM ATL ⇔ NOR
ATL : With the ATL trim feature,
t r i m a d j u s t m e n t s h a v e
n o e f f e c t o n t h e h i g h
throttle. This prevents the
linkages from binding when
adjustments are made.
59