Flight Mode - FUTABA 6K Instruction Manual

Flight mode

FLY MOD
Function
This flight mode is used for a controller of the
multi-copter connected to 6CH.
4 can be changed to a flight mode by the
chosen switch. It's used in case of a controller of
a multicopter of the type to which the flight mode
can be changed.
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
（1 second）
● When not using this Function
select INH. The display of On/
Off is shown when active and
assigned to a switch.
Flight mode
● Select the setting item
with the Jog key.
Flight mode
■ Activating the function
① S e l e c t t h e " I N H " i t e m o f t h e
condition you want to use and
then set that flight mode to "ON"
or "OFF" by pressing the + key or
– key.
● Set conditions you do not want to use to "INH".
（Changing the switch）
■ Switch selection
② Change the switch by
pressing the + key or
– k e y a t t h e s w i t c h
selection item.
Range：SwA ～ SwD
Default：SwA
② Select
"FLY MOD"
from the menu with the
Jog key.
（Activating the function）
（Switch selection）
＋ －
or
＋ －
or
③ Open the setting screen by
pressing the Jog key.
（Switch direction）
■ Switch direction
③ Select the ON direction
by pressing the + key or
– key at the ON direction
selection item.
Range：
● 2P SW：NULL, UP, DOWN
● 3P SW：NULL, UP, UP&D, UP&C, CNTR, C&DN,
DOWN
(MULTICOPT)
● NOR is setting of CH6
of the state that SW is
off. 0 is usually used in
this state neutrally. Even
if the numerical value
i s c h a n g e d i n c a s e o f
INH, movement doesn't
reflect 1-4.
● Priority is given to the
mode 2 when the mode
1 a n d 2 i s t u r n e d o n
simultaneously.
＋ －
or
151