Hovering Throttle; Hov Thr - FUTABA 6K Instruction Manual

6-channel digital proportional r/c system
Hide thumbs Also See for 6K:
Table of Contents

Advertisement

HOV THR

Function
The hovering throttle function trims the throttle
near the hovering point.
When the hovering throttle VR is turned
clockwise, the speed increases and when it is turned
counterclockwise, the speed decreases. Rotor
speed changes due to changes in the temperature,
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
Activating the function
Trim memory settting
Selection of condition
● Select the setting item
with the Jog key.

Hovering Throttle

■ Activating the function
① S e l e c t t h e " M I X "
i t e m a n d t h e n
select the "ON" by
pressing the + key
or – key.
● When you do not use a function, set to
the "INH" side.
■ VR setting
③ Select the "VR" item and then select the
"VR" by pressing the + key or – key.
Range:NULL ( OFF) , +VR, -VR
Default:NULL
132
Hovering throttle
② Select
(1 second)
VR setting
● NORM:Only the normal condition operates
● NORM/IDL1:It operates by normal condition and
idle-up1.
or
humidity, and other flying conditions can be
trimmed. Adjust for the most stable rotor speed.
More precise trimming is possible by using this
function together with the hovering pitch function.
●The operation condition can be selected from only
normal or normal/idle up 1.
"HOV THR"
from the menu with the
Jog key.
■ Selection of condition
② Select the "MODE" item
and then select condition
by pressing the + key or –
key.
Range:NORM, NORM/IDL1
Default:NORM
(Memorizing the hovering throttle adjustment position)
■ Memory setting
④ Select the "RATE" item and memorize the
current trim position by pressing the Jog
key.
● When the VR is returned to the center after
memorization, the trim position returns to its
previous position.
[NOTE]If memorization is repeated at the same
position, the value is cumulated.
(HELICOPTER)
③ Open the setting screen by
pressing the Jog key.
● When "INH", the function
cannot be used. To use the
function, switch to "ON".
(Compensation amount at trim
memory)
(Actual compensation amount
including the hovering throttle
VR)
● The VR operating direction is
different depending on the
polarity.
or
 

Advertisement

Table of Contents
loading

Table of Contents