Condition - FUTABA 6K Instruction Manual

CONDIT
Function
The condition switches (idle up 1/2 and throttle
hold switch) are not operative at initial setting.
Switch setting is performed in advance with the
condition select function.
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
Throttlehold
● Select the setting item
with the Jog key.
Condition select
■ Activating the function
① S e l e c t t h e " I N H " i t e m o f t h e
condition you want to use and set
it to "ON" or "OFF" by pressing the
+ key or – key.
● Set conditions you do not want to use to "INH".
（In the case of change of a switch）
■ Switch selection
② A cursor is moved to
"Switch selection" and
a switch is changed by
＋ key or － key.
Range：SwA ～ SwD
Default：SwC （ IDLE-UP1） ,
SwC （ IDLE-UP2） , SwD （THR-HOLD）
114
Condition select
② Select
（1 second）
Idle-up
setting
setting
（Activating thefunction） （Switch direction ）
＋
＋
or
(Idle-up・Throttlehold)
●Initially set to idle up 1: SwC (center), idle up 2: SwC
(down), throttle hold: SwD (down).
"CONDIT"
from the menu with the
Jog key.
（Switch selection ）
－
or
■ Switch direction
③ A c u r s o r i s m o v e d t o
－
"Switch direction" and
a s w i t c h d i r e c t i o n i s
changed by ＋ key or －
key.
● 2P SW：NULL, UP, DOWN
● 3P SW：NULL, UP, UP&D, UP&C, CNTR, C&DN,
DOWN
(HELICOPTER)
③ Open the setting screen by
pressing the Jog key.
● When not using this Function
select INH. The display of On/
Off is shown when active and
assigned to a switch.
＋ －
or
Range：