Center Alarm - FUTABA 6K Instruction Manual

CNT ALM
Function
An alarm (single beep) can be sounded at the specified throttle stick position.
●Alarm function ON/OFF can be set by switch.
Method
Calling the setting screen
① Call the menu screen from the
home screen by pressing the +
key for 1 second.
＋
● When INH is selected, the function cannot be used. When
ON or OFF is selected, the function is activated. ON and OFF
changes are linked to the switch.
INH ⇔ ON/OFF
Switch selsction
Switch direction
Stick position
Position setting
① Stick position is chosen by
Jog key.
OFF
152

Center alarm

② Select
（1 second）
● The number in parenthesis
is the current throttle stick
position.
② Set the throttle stick to the
position at which you want
to generate the alarm.
When the THR stick
is set to the
specified position.
"CNT ALM"
from the menu with the
Jog key.
● Select the item
w i t h t h e J o g
key.
● This is a throttle stick position alarm.
When a throttle stick was besides the slow position
and a transmitter was turned on. → Alarm start
THR Stick
(MULTICOPT)
Beep sounds
③ Open the setting screen by
pressing the Jog key.
③ When the Jog key is held
down the alarm sounds at
that position.
Memorize the position at
which the beep is to sound.