FUTABA 6K Instruction Manual page 154

D/R
① A channel is chosen by Jog
key.
Range：1, 2, 4
Adjust the rate of each direction of the dual rate switch and stick by repeating step
EXPO
① Select the "EXP" item and
then select the channel with
the Jog key.
Range：1 ～ 4
Adjust the rate of each direction of the dual rate switch and stick by repeating step
Switch Change
① Select the "SW" item and then select
the channel with the Jog key.
Range：1, 2, 4
EXPO TYPE : Throttle only
TYPE ▶
THR : HIGH
THR : LOW
Stick : LOW
154
② Adjust the rate by moving the cursor
to D/R with the Jog key, switching the
dual rate switch to the direction you
want to set, moving the stick to the left
(down) or right (up) side and pressing
the + key or – key.
② Adjust the rate by moving the cursor
to EXP with the Jog key, switching the
dual rate switch to the direction you
want to set, moving the stick to the left
(down) or right (up) side and pressing
the + key or – key.
NORM
Using the NORM
curve is helpful in a
model is controlled
at the throttle stick
whole field.
Stick : HIGH
＋
● Moving to another setting item of the same
channel is possible by Jog key.
＋
● Moving to another setting item of the same
channel is possible by Jog key.
② A switch is chosen by + key or -key.
＋ －
or
Range：SwA ～ SwD
TYPE ▶
THR : HIGH
THR : LOW
Stick : LOW
Range：
0 ～ 140%
Default：100%
● When you want to
return the set value to
the initial value, press
the + key and – key
－
simultaneously.
Range：
-100 ～ +100%
Default：0%
● When you want to
return the set value to
the initial value, press
－
the + key and – key
simultaneously.
SEPA
Using the SEPA
curve is helpful in a
model is controlled
at an upper part
from neutral of a
throttle stick.
Stick : HIGH