FUTABA 6K Instruction Manual page 146

RANGE setting
■ Setting state
① Select the "0%" item next to
RANGE with the Jog key.
■ Set value memorization
③ Press the Jog key for 1 second.
Hold the stick in
position.
● Use example of RANGE
Elevator Operation
146
[ELE → Camber ２page]
● Setting that inhibits camber mixing near the elevator center position. Setting so
that camber mixing is performed only when the elevators were operated greatly
is possible.
■ To setting value
② Move the elevator stick to the position you
want operation to begin.
Can be either up or down. When set
to down, the up side is also set by the
same amount.
ELE→CAMBR
ELE→CAMBR
ELE→CAMBR
AIL1 ▶
(RATE1)
(RATE1)
AIL2 ▶
AIL1 ▶
AIL1 ▶
MIX ▶ INH
AIL2 ▶
AIL2 ▶
SW ▶ SwA ▶ DOWN
MIX ▶ INH
MIX ▶ INH
RANGE▶
SW ▶ SwA ▶ DOWN
SW ▶ SwA ▶ DOWN
RANGE▶
RANGE▶ 30%
When elevator operation exceeds the range,
the stick position is displayed and mixing is
performed.
● When a RANGE number is selected and the
Jog key is pressed for 1 second, RANGE is
reset to 0% and normal mixing is performed.
Only an elevator moves in case of a little operation.
Elevator and flap move in case of big operation.
● When MIX is set to ACT, the
amount of MIX(s) according to
stick operation is displayed.
(NORM)
(NORM) 1 2
(RATE1) (RATE2)
(NORM) 1 2
0 ▶
(RATE2)
(RATE2)
0 ▶
0 ▶ 0
0 ▶ 0
0 ▶ 0
0 ▶ 0
30% ( 30%)
30% ( 30%)
( 30%)
1 2
0
0