FUTABA 6K Instruction Manual page 124

Swash mixing
■ Activating the function
① Select the "MIX" item and then select the
"ON" by pressing the + key or – key.
＋
● When you are not using a function, set
this to INH.
● ON/OFF of a function, setup of rate, and a trim, Jog key is pushed and
setting condition can be chosen.
124
－
or
Range：
NORM, IDL1, IDL2, HOLD
■ Setup of rate
② Select the "RATE" item and then adjust the mixing
rate by pressing the + key or – key.
Range：-100 ～ +100%
Default：0%
● When you want to return the set value to the initial
value, press the + key and – key simultaneously.