Activating the function
Selection of condition
High side Setup of rate
Low side Setup of rate
● Select the setting item
with the Jog key.
Pitch → Rudder mixing
■ Activating the function
① S e l e c t t h e " M I X "
i t e m a n d t h e n
select the "ON" by
pressing the + key
or – key.
● When you do not use a function, set to
the "INH" side.
■ Setup of rate
③ Select each function item of "HI"or
"LO" and set the rate by pressing the
+ key or – key.
Default(NORM):-20%(LOW) +20%(HIGH)
Default(IDL1/2):0%(LOW) 0%(HIGH)
● When you want to return the set value to the initial value,
press the + key and – key simultaneously.
130
+
-
or
Range:-100 ~ +100%
(Rate)
■ Selection of condition
② Select the "COND" item
and selection of condition
by pressing the + key or –
key.
Range:NORM, IDL1/2
+
-
or
● When not using this function,
select INH.
(present switch position )
+
-
or