General Run And Transport Problems - Toro Greensmaster 3250-D 04383 Service Manual

General Run and Transport Problems

Problem
Engine kills when the Functional Control Lever is in the
MOW or TRANSPORT position with the operator in the
seat.
Battery does not charge.
Engine kills during operation (operator sitting on seat).
Electrical System (Rev. C)
Possible Causes
Operator is sitting too far forward on the seat (seat
switch not depressed).
Seat hinge, support pin, or spring binding is preventing
the seat switch from closing.
Seat switch is faulty or out of adjustment.
Seat switch wiring is loose, corroded, or damaged.
Wiring to the charging circuit (see Wiring Schematics)
components is loose, corroded, or damaged.
Voltage regulator/alternator is faulty.
Fuselink 1 is open.
Ignition switch is faulty.
Battery is dead.
Operator moved too far forward on the seat (seat
switch not depressed).
Engine overheated.
Wiring to the run circuits (see Wiring Schematics)
components became broken or disconnected.
Page 5 − 6
Greensmaster 3250−D