Special Tools - Toro Greensmaster 3250-D 04383 Service Manual

Special Tools

Order special tools from your Toro Distributor.
Gauge Bar Assembly
Used to verify height--of--cut. Toro Part No. 13--8199.
Backlapping Brush Assembly - - TOR299100
Used to apply lapping compound to cutting units while
keeping the operator's hands at a safe distance from the
rotating reel.
Bedknife Screw Tool - - TOR510880
This screwdriver--type bit is made to fit Toro bedknife at-
taching screws. Use this bit with a torque wrench to se-
cure the bedknife to the bedbar.
DO NOT use and air or manual impact wrench with this
tool so damage to the bedbar will be prevented.
Greensmaster 3250--D
Some tools may have been supplied with your mower or
available as TORO parts. Some tools may also be avail-
able from a local supplier.
Page 7 - - 5 Rev. I
SPA and 4- -Bolt Cutting Units (Rev. A)
Figure 3
Figure 4
Figure 5