Service And Repairs; Verify Interlock System Operation - Toro Greensmaster 3250-D 04383 Service Manual

Table of Contents

Advertisement

Service and Repairs

Note: See the Briggs and Stratton Vanguard/Dai-
hatsu Repair Manual for 3 Cylinder Water−Cooled
Diesel Engines for more component repair information.

Verify Interlock System Operation

CAUTION
The interlock switches are for the operator's
protection; do not disconnect them. Check the
operation of the interlock switches daily for
proper operation. Replace any malfunctioning
switches before operating the machine.
The purposes of the interlock switches are to:
A. Prevent the engine from cranking or starting un-
less the Functional Control Lever is in NEUTRAL.
B. Prevent operating the traction pedal with the
Functional Control Lever in NEUTRAL.
C. Shut off the engine if the operator leaves the seat
without the Functional Control Lever in NEUTRAL.
D. Shut off the reels if the Functional Control Lever
is moved to NEUTRAL or TRANSPORT.
Greensmaster 3250−D
1. Sit on the seat, engage parking brake, and move
Functional Control Lever to NEUTRAL. Try to depress
traction pedal. If the pedal does not depress, the inter-
lock system is operating correctly. Correct problem if not
operating properly.
2. Sit on the seat, engage parking brake, keep traction
pedal in neutral, and place Functional Control Lever in
MOW or TRANSPORT. Try to start the engine. If the en-
gine does not crank, the interlock system is operating
correctly. Correct problem if not operating properly.
3. Sit on the seat and start engine. Move Functional
Control Lever to Mow. Raise off the seat. If the engine
stops, the interlock system is operating correctly. Cor-
rect problem if not operating properly.
4. Sit on the seat, engage parking brake, keep traction
pedal in neutral, and place Functional Control Lever in
NEUTRAL. Start the engine. Move Raise / Lower − Mow
Control Lever forward to lower the cutting units. If the
units do not start rotating, the interlock system is operat-
ing correctly. Correct problem if not operating properly.
Rev. H
Page 5 − 23
Electrical System (Rev. C)

Advertisement

Table of Contents
loading

Table of Contents