China Sensible Code Set Length 2 - Datalogic Gryphon I GD44XX Product Reference Manual

China Sensible Code

China Sensible Code Set Length 2

This feature specifies one of the bar code lengths for
Length
Mode, or the second fixed length if in Fixed Length Mode. Characters can be
set from 0001 to 7,827 characters in increments of 0001 (pad with zeroes).
See
$CCSL2
Select China Sensible Code Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
Product Reference Guide
Control. Length 2 is the maximum label length if in Variable Length
page 283 for detailed instructions on setting this feature.
Length 2 is 7,827 Characters
DEFAULT
Enter/Exit Programming Mode
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar code
at left followed by the digits from the Alphanumeric
Appendix D, Keypad
characters in
your desired character(s). End by scanning the
ENTER/EXIT bar code again.
~
CANCEL
China Sensible Code
epresenting
r
223