Multiple Labels Ordering By Code Symbology - Datalogic Gryphon I GD44XX Product Reference Manual

References

Multiple Labels Ordering by Code Symbology

This feature Specifies the transmission ordering by symbology type, when
Multiple Labels per Frame is enabled.Up to six symbologies can be selected.
Zeroes must be added to pad the string to 12 characters if not using all six
symbologies.
The labels are ordered first as specified in the output mask. Labels present
in the volume but not specified will be transmitted as unspecified symbolo-
gies in random order as allowed by the reading time sequence. For each
label decoded in the volume the reader signals the standard beeper and LED
indications.
To specify the symbology order:
1. Determine the symbologies and order you want to specify.
2. Use
3. Go to
4. Scan the bar code: "SELECT SYMBOLOGIES FOR MULTIPLE LABELS
5. Scan the appropriate two alphanumeric characters from the keypad in
6. Scan zeroes if needed to make a 12-character string.
7. When finished, scan the ENTER/EXIT PROGRAMMING MODE bar code to
This completes the procedure. See
set this feature.
Table 43. Multiple Labels Ordering by Code Symbology Examples
STEP ACTION
1 Desired symbology
2 Hex equivalent from Table 44
3 Scan ENTER/EXIT PROGRAMMING MODE
4 Scan SELECT SYMBOLOGIES FOR MULTIPLE LABELS ORDERING
Scan Two Characters From
5
Appendix D, Keypad
RESULT
6 Scan ENTER/EXIT PROGRAMMING MODE
Table 44 on page 301
300
Table 44 on page 301
gies.
page 122 and scan the ENTER/EXIT PROGRAMMING MODE bar
code to enter Programming Mode.
ORDERING".
Appendix D, Keypad, that represent the desired character/value in step
2 above.
exit Programming Mode.
EXAMPLES
Code 39
24
'2' and '4'
0x240E0C4E0000
shows the hex value associated with each symbology.
to find the hex values for up to six symbolo-
Table 43 for some examples of how to
Data Matrix Code 128
0E 0C
'0' and 'E' '0' and 'C'
Gryphon™ I GD44XX/GBT4400/GM440X
Aztec
4E
'4' and 'E'