Individually Set Label Id; Label Id Control - Datalogic Gryphon I GD44XX Product Reference Manual

Individually Set Label ID

This feature configures a Label ID individually for a single symbology. To
set, first define whether you want it as a prefix or suffix by scanning a label
below. Then turn to
Symbologies, starting on page 94
followed by up to 3 characters from the ASCII Chart at the back of this man-
ual. See
instructions on setting this feature.

Label ID Control

This option controls whether a Label ID is disabled, or sent as a prefix or
suffix for a given symbology type.
DEFAULT
$CIDCO01(CR)
Label ID Transmission = Enable as Prefix
Product Reference Guide
Label ID Symbology Selection − 1D
"Label ID: Set Individually Per Symbology" on page 290
Enter/Exit Programming Mode
to select the symbology you want to set,
$CIDCO00(CR)
Label ID Transmission = Disable
$CIDCO02(CR)
Label ID Transmission = Enable as Suffix
for detailed
93