References
5. Scan the ENTER/EXIT bar code once again to exit Programming Mode.
6. The resulting message string would appear as follows:
Global AIM ID
AIM label identifiers (as opposed to custom characters you select yourself as
with label identifiers) can be included with scanned bar code data. AIM label
identifiers consist of three characters as follows:
•
•
•
SYMBOLOGY
UPC/EAN
Code 39 and
Code 32
Codabar
Interleaved 2 of 5
Code 93
a. UPC-A and UPC-E labels are converted to EAN 13 when adding AIM IDs.
b. ISBN (X with a 0 modifier character)
Figure 17. AIM ID
286
Scanned bar code data:
Resulting message string output:
This feature enables/disables addition of AIM IDs for all sym-
bology types.
A close brace character (ASCII ']'), followed by...
A code character (see the table below), followed by...
A modifier character (the modifier character is symbol dependent).
CHAR
E
Prefix
Label ID
AIM ID
12345
$12345
SYMBOLOGY
a
Code 128/GS1-128
DataBar Omnidirectional,
A
DataBar Expanded
F
Standard 2 of 5
I
ISBN
G
Code 11
Bar Code Data
Gryphon™ I GD44XX/GBT4400/GM440X
CHAR
C
e
S
b
X
H
Label ID
Suffix