Customizing Configuration Settings; Configure Interface Settings; Global Interface Features; Configuring Other Features - Datalogic Gryphon I GD44XX Product Reference Manual

Setup

Customizing Configuration Settings

Configure Interface Settings

If after scanning the interface bar code from the previous table, your instal-
lation requires you to select options to further customize your reader, turn
to the appropriate section for your interface type in
ters"
•
•
•
•
•
•

Global Interface Features

See "Global Interface Features" on page 41
interface types.

Configuring Other Features

If your installation requires different programming than the standard factory
default settings, the following sections of this manual allow configuration of
non-interface-specific settings you might require:
Reading Parameters
beeper and LED indicators and other universal settings.
1D Symbologies
bologies). These settings allow you to enable/disable symbologies, set label
lengths, require check digit, etc.
WIRELESS FEATURES
tooth models only.

Software Version Transmission

The software version of the device can be transmitted over the RS-232 and
Keyboard interfaces by scanning the following label.
RevA
34
starting on page 39.
"RS-232 Interface" on page 43
"RS-232/USB-Com Interfaces" on page 48
"Keyboard Settings" on page 67
"RS-232/USB-Com Interfaces" on page 48
"IBM 46XX Interface" on page 79
"Wand Emulation Interface" on page 83
Reading Parameters include programming for scanning,
:
Includes options concerning the bar code label types (sym-
:
Contains programming options for RF, STAR and Blue-
:
Transmit Software Version
"Configuration Parame-
for settings configurable by all
Gryphon™ I GD44XX/GBT4400/GM440X