Enter/Exit Programming Mode1D Code Selection
4. Complete the programming sequence by scanning the ENTER/EXIT
Use this feature to disable all symbologies.
1. Scan the ENTER/EXIT PROGRAMMING Mode bar code.
2. Scan the Disable All Symbologies bar code.
3. Complete the programming sequence by scanning the ENTER/EXIT
124
Additional information about many features can be found in the "Ref-
erences" chapter.
If you make a mistake before the last character, scan the CANCEL bar
code to abort and not save the entry string. You can then start again
at the beginning.
PROGRAMMING bar code to exit Programming Mode.
DISABLE ALL SYMBOLOGIES
PROGRAMMING bar code.
$AD(CR)
Disable All Symbologies
This does not disable the reading of programming labels.
Gryphon™ I GD44XX/GBT4400/GM440X