Code 128 Set Length 2 - Datalogic Gryphon I GD44XX Product Reference Manual

1D Code Selection

Code 128 Set Length 2

This feature specifies one of the bar code lengths for
trol. Length 2 is the maximum label length if in
the second fixed length if in
code's data characters only.
The length can be set from 1 to 80 characters. A setting of 0 specifies to
ignore this length (only one fixed length).
Table 6
instructions on setting this feature.
Table 6. Code 128 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 128 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
.
$CC8L2
Select Code 128 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start again
at the beginning.
Product Reference Guide
provides examples for setting Length 2. See
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
80 = Length 2 is 80 Characters
DEFAULT
Enter/Exit Programming Mode
Variable Length
Fixed Length Mode. Length includes the bar
07 Characters 15 Characters
'0' and '7'
~
Code 128 Length Con-
Mode, or
page 283 for detailed
80 Characters
'1' and '5' '8' and 0'
CANCEL
161