Code 93 Set Length 2 - Datalogic Gryphon I GD44XX Product Reference Manual

1D Code Selection

Code 93 Set Length 2

This feature specifies one of the bar code lengths for
trol. Length 2 is the maximum label length if in
the second fixed length if in
code's check, data, and full-ASCII shift characters. The length does not
include start/stop characters. The length can be set from 1 to 50 characters.
A setting of 0 specifies to ignore this length (only one fixed length).
Table 20
instructions on setting this feature.
Table 20. CODE 93 Length 2 Setting Examples
STEP ACTION
1 Desired Setting
2 Scan ENTER/EXIT PROGRAMMING MODE
3 Scan SELECT CODE 93 LENGTH 2 SETTING
Scan Two Characters From
4
Appendix D, Keypad
5 Scan ENTER/EXIT PROGRAMMING MODE
$CC9L2
Select Code 93 Length 2 Setting
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the beginning.
Product Reference Guide
provides examples for setting Length 2. See
EXAMPLES
00 (Ignore This
Length)
'0' and '0'
50 = Length 2 is 50 Characters
DEFAULT
Enter/Exit Programming Mode
Variable Length
Fixed Length Mode. Length includes the bar
07 Characters 15 Characters
'0' and '7' '1' and '5'
~
Code 93 Length Con-
Mode, or
page 283 for detailed
50 Characters
'5' AND '0'
CANCEL
205