Storage Data; External Protection Devices And Wire Sizes - Chloride SYNTHESIS User Manual

Table A: UPS Installation with standard battery
DESCRIPTION
UPS Rating
Cabinet
Length
Width*
Height
Weight
Total weight
Floor loading
Extracted volume of air
Max. noise level (@ 1m)
Terminal Torque:
Line and neutral
Ground
Maximum dissipation
(@ normal load and battery
in recharge )

1.5.4 STORAGE DATA

Temperature limits - batteries
Temperature limits - electronics -20°C to +70°C (0°F to 144°F)
Relative humidity

1.5.5 EXTERNAL PROTECTION DEVICES AND WIRE SIZES

The Synthesis™ UPS does not contain branch overcurrent protection devices on either its
input or output. It is the responsibility of the installer to provide this protection. Read the
following sections carefully, following NEC and local codes in all cases if there is a conflict
with this document.
External devices for the protection of cables external to the UPS shall be installed
upstream of the equipment.
CAUTION
To reduce the risk of fire, only connect this UPS to a circuit provided with maximum
branch circuit overcurrent protection as specified in Table B below and in accordance
with the National Electrical Code, ANSI/NFPA 70.
Unit of UPS Size
Measure (kVA)
kVA 4-6
UPS Output
in 19.5 19.5
in 14.2 10
in 30.3 30.3
lb. 200 135
lb. 335
2
lb/ft 102
3
Ft /min 97
dBA 48
13
Pound-
13
inches
Unit size 4 5
W 260 330 400 490 610 730
0°C to +35°C (32°F to 88°F)
from 0% to 90%
11
8-12
UPS Output
24.6 24.6
17.7 12
38.2 38.2
477 152 340
632 340
124
119
50
20
13
6 8 10 12 14
2150
14-18
UPS
23.6
33.0
43.5
425
425
255
52
39
13
16 18
2458 2766