Configuring Static Vlans; Figure 7-25 Configuration: Vlan: Current Status; Table 7-20 Configuration: Vlan: Current Status - ZyXEL Communications NetAtlas IES-1000 User Manual

NetAtlas IES-1000 (AAM1008) EMS User's Guide
The following table describes the labels in this screen.
LABEL
Index This field displays a unique number for identification purposes.
VLAN ID This field displays the ID of the VLAN.
Fdb ID This field displays the unique number that identifies the VLAN's Filtering Database (FDB).
Status This field displays Permanent if the VLAN is active and will remain so after the next reset of the
device. This field is DynamicGVRP if the VLAN is active and will remain so until removed by
GVRP. This field is other if the VLAN is active, but is not permanent or created by GVRP.
Creation Time This field displays the time the VLAN is created.
Time Mark This field displays the read-only time filter. This field always displays 0.
VLAN x (y) (where x is a number in the Index column and y is a number in the VLAN ID field)
Tagged Port This field indicates whether a port is tagged (Y) or not.
Untagged Port This field indicates whether a port is untagged (Y) or not.
Close Click Close to close the screen.
7.6.5

Configuring Static VLANs

This section shows you how to create new VLANs and assign ports to a VLAN.
7-30

Figure 7-25 Configuration: VLAN: Current Status

Table 7-20 Configuration: VLAN: Current Status

DESCRIPTION
The Configuration Menus