Select a profile in the VC Profile list.
2.
Select the port(s) in the Port-VPI-VCI list.
3.
Click Mapping --> to create the mapping.
4.
Click Close to save the settings and close the screen.
5.
7.5.5
Sorting Virtual Channel Configuration Entries
You can sort the entries in the Virtual Channel Configuration screen based on the port number, the VCI, the
VPI or the PVID.
In the Virtual Channel Configuration screen, click Sorting to display the Sort screen as shown below.
1.
The Configuration Menus
Figure 7-20 Virtual Channel Configuration: Mapping
NetAtlas IES-1000 (AAM1008) EMS User's Guide
7-25