Expand Dialog Box; Figure 5-3 Edit Table Entry: Expand - ZyXEL Communications NetAtlas IES-1000 User Manual

COMMAND
Next
Stop
Set All
Done
Help
You can only use the variable Set button (via the EMS) to update system contact, system name,
system location and the administrative status of each DSL port.
5.1.2

Expand Dialog Box

In the Edit Table Entry screen click the Expand button to expand the view of the active variable value edit box.
First click on the edit box, then click Expand.
Information Formats
Table 5-1 Edit Table Entry
Click the Next button to obtain the next entry of the table from the node, using an SNMP
GetNext operation. The variable values are updated. If there are no more entries in the
table, a message is displayed. You can specify a starting point for the GetNext by entering
index values. You do not need to enter all index values, but if you enter the Nth index value,
you must also enter the 1
Click the Stop button to abort the current SNMP operation. This button can be used to stop
a command when a node is not responding and you don't want to wait for the timeout
period.
Click the Set All button to set all writable variable values to the node. You must enter all of
the index values (those with an asterisk to the right of the variable name) to select the table
entry. If you do not know the proper index values, you can first find the entry you want to
change by using the First and Get, Next buttons.
Some nodes do not allow set operations to all variables that are defined as writable in the
MIB. For these nodes, you will have to individually set table entry variables using the
variable Set buttons.
Click this button when you're done editing this dialog box.
Click this button to display the EMS user's guide in PDF format.

Figure 5-3 Edit Table Entry: Expand

NetAtlas IES-1000 (AAM1008) EMS User's Guide
DESCRIPTION
st th
through (N-1) index values.
5-3