Line Setup; Figure 7-6 System: Adsl: Line Setup; Table 7-5 System: Adsl: Line Setup - ZyXEL Communications NetAtlas IES-1000 User Manual

NetAtlas IES-1000 (AAM1008) EMS User's Guide
LABEL
AtucMaxTxRate This field displays the downstream maximum transmission rate in kilobits per second (Kbps).
AtucTargetSNRMgn This field displays the downstream target SNR margin in decibels (dB).
AtucMinSNRMgn This field displays the downstream minimum SNR margin in decibels (dB).
AtucMaxSNRMgn This field displays the downstream maximum SNR margin in decibels (dB).
Close Click Close to close the screen.

7.3 Line Setup

To display the status of the ADSL lines (or ports), click Configuration, ADSL and Line Setup to display the
ADSL Line Setup screen as shown.
The following table describes the labels in this screen.
LABEL
Port The field displays the port (or line) number.
AdminStatus This field displays Down if the port inactive. This field is Up if the port is active. This port is
Testing if you are running a test on the port.
ADSL Mode This field displays the mode used on the port.
Encap. This field displays the encapsulation method used on the port.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI). The VPI
and VCI identify a channel on this port.
Profile This field displays the name of the profile the port is using.
Set Ports Click Set Ports to configure the selected port(s). Refer to Section 7.3.1.
Profile Mapping Click Profile Mapping to associate profiles to the ADSL ports.
7-8
Table 7-4 ADSL Line Profile Management: List All Profiles

Figure 7-6 System: ADSL: Line Setup

Table 7-5 System: ADSL: Line Setup

DESCRIPTION
DESCRIPTION
The Configuration Menus