Finding Your Zyxel Device; Device Auto-Discovery; Figure 3-13 Compile Mibs (Last) Screen; Figure 3-14 Config, Discovery Agents - ZyXEL Communications NetAtlas IES-1000 User Manual

NetAtlas IES-1000 (AAM1008) EMS User's Guide
Click Yes when asked to confirm, then click OK in the Mib Compile OK screen.
5.
Finally click Done in the Compile Mibs screen (see Figure 3-10).
6.

3.7 Finding Your ZyXEL Device

The SNMPc Network Manager can find new devices automatically using auto-discovery (enabled by the default)
or you will have to add device(s) manually.
3.7.1

Device Auto-Discovery

To enable auto discovery and then find your device, click Config, Discovery Agents.
Select the Enable Discovery check box and click OK.
1.
3-8

Figure 3-13 Compile Mibs (Last) Screen

Figure 3-14 Config, Discovery Agents

EMS Installation