Line Status; Figure 7-9 System: Adsl: Line Status; Table 7-7 Adsl Line Status - ZyXEL Communications NetAtlas IES-1000 User Manual

Select multiple port numbers (by pressing the [CTRL] key and clicking at the same time) or a port number
3.
in the Port field and click Mapping =>. The port-profile mapping displays in the Port Profile list box.
Click Close to close the screen.
4.
7.3.3

Line Status

Line status allows you to view current line status of ports. Line status information is refreshed every 30 seconds.
Click Configuration, ADSL, Line Status to display the ADSL Line Status screen.
The following table describes the labels in this screen.
LABEL
Port This field displays the port (or line) number.
Line Type This field displays the mode (interleave or fast) used on the port.
Admin Status This field is Enable if the port is activated. This field is Disable if the port is not activated.
Oper Status This field displays the actual operational status of the port. This field is Up if the port is working
properly. This field is Down if the port is not working properly.
Upstream Tx This field displays the actual upstream transmission speed in kilobits per second (Kbps).
Rate
Downstream Tx This field displays the actual downstream transmission speed in kilobits per second (Kbps).
Rate
The Configuration Menus

Figure 7-9 System: ADSL: Line Status

Table 7-7 ADSL Line Status

NetAtlas IES-1000 (AAM1008) EMS User's Guide
DESCRIPTION
7-11