Assigning A Profile To A Port; Figure 7-8 Adsl Line Setup: Profile Mapping - ZyXEL Communications NetAtlas IES-1000 User Manual

NetAtlas IES-1000 (AAM1008) EMS User's Guide
LABEL
Encapsulation Select this option and select an encapsulation method from the drop-down list box. Choices
are LLC and VC.
VPI Select this option and select the Virtual Path Identifier (VPI) for this port. Enter a number
between 0 and 255.
VCI Select this option and select the Virtual Circuit Identifier (VCI) in this field. Enter a number
between 0 and 65535.
Line Profile Select a profile name from the drop-down list box to associate to the port. You may also use
the ADSL Profile Mapping screen as discussed later.
Refer to Table 7-3 for the other field descriptions.
7.3.2

Assigning a Profile to a Port

You may also use the ADSL Profile Mapping to associate a profile to a port.
In the ADSL Line Setup screen click Profile Mapping to display the Profile Mapping screen.
1.
Select a profile name in the Profile field. The profile settings display in the lower panel. Refer to Table
2.
7-2 for field descriptions.
7-10
Table 7-6 ADSL Line Setup: Set Port

Figure 7-8 ADSL Line Setup: Profile Mapping

DESCRIPTION
The Configuration Menus