Port Filtering Setup; Figure 7-32 Configuration: Port Filtering; Table 7-24 Configuration: Port Filtering - ZyXEL Communications NetAtlas IES-1000 User Manual

NetAtlas IES-1000 (AAM1008) EMS User's Guide
The following table describes the labels in this screen.
LABEL
Port
1 .. 8, Ethernet
Set
Cancel
7.8.2

Port Filtering Setup

To set port filtering, click Set in the Port Filtering screen to display the screen as shown below.
7-38

Figure 7-32 Configuration: Port Filtering

Table 7-24 Configuration: Port Filtering

This field displays the port number.
This field displays Y if this port is allowed to communicate with the corresponding port in
the Port field.
Click Set to configure port filter.
Click Cancel to close this screen.
DESCRIPTION
The Configuration Menus