Figure 7-16 Configuration: Network Configuration: Bridge: Dynamic Filtering Table; Table 7-14 Configuration: Network Configuration: Bridge: Dynamic Filtering Table - ZyXEL Communications NetAtlas IES-1000 User Manual

Figure 7-16 Configuration: Network Configuration: Bridge: Dynamic Filtering Table

The following table describes the fields in this screen.

Table 7-14 Configuration: Network Configuration: Bridge: Dynamic Filtering Table

FIELD
Address This is a unicast MAC address for which the bridge has forwarding and/or filtering information.
Port Enter "0" or the port number of the port on which a frame having a source address equal to the value of
the corresponding instance of dot1dTpFdbAddress has been seen. A value of "0" indicates that the port
number has not been learned but that the bridge does have some forwarding/filtering information about
this address (for example in the dot1dStaticTable). Implementers are encouraged to assign the port
value to this object whenever it is learned even for addresses for which the corresponding value of
dot1dTpFdbStatus is not learned.
Status This object indicates the status of this entry. The meanings of the values are:
Other (1)
This would include the case where some other MIB object (not the corresponding instance of
dot1dTpFdbPort, nor an entry in the dot1dStaticTable) is being used to determine if and how frames
addressed to the value of the corresponding instance of dot1dTpFdbAddress are being forwarded.
Invalid (2)
This entry is no longer valid (e.g., it was learned but has since aged-out), but has not yet been flushed
from the table.
Learned (3)
The value of the corresponding instance of dot1dTpFdbPort was learned, and is being used.
Self (4)
The value of the corresponding instance of dot1dTpFdbAddress represents one of the bridge's
addresses. The corresponding instance of dot1dTpFdbPort indicates which of the bridge's ports has this
address.
Mgmt (5)
The value of the corresponding instance of dot1dTpFdbAddress is also the value of an existing instance
of dot1dStaticAddress
For information on editing a table entry, please see Section 5.1.1.
The Configuration Menus
NetAtlas IES-1000 (AAM1008) EMS User's Guide
DESCRIPTION
7-19