LABEL
Cancel
Click Cancel to close the screen.
7.3.1
ADSL Line Setup
To configure the ADSL port(s), select a number of ports (by pressing the [CTRL] key and clicking at the same
time) or a port in the ADSL Line Setup screen and click Set Ports.
To change the port settings, select the check box for the field(s). The following table describes the related labels in
this screen.
LABEL
Admin Status
Select this option and select Enable from the drop-down list box to activate the port. Select
Disable to deactivate the port.
ADSL Mode
Select this option and select a mode from the drop-down list box. Refer to the user's guide
that comes with your IES for more information.
The Configuration Menus
Table 7-5 System: ADSL: Line Setup
Figure 7-7 ADSL Line Setup: Set Port
Table 7-6 ADSL Line Setup: Set Port
NetAtlas IES-1000 (AAM1008) EMS User's Guide
DESCRIPTION
DESCRIPTION
7-9