Figure 5-2 Edit Table Entry; Table 5-1 Edit Table Entry - ZyXEL Communications NetAtlas IES-1000 User Manual

NetAtlas IES-1000 (AAM1008) EMS User's Guide
Variable Name
The following table describes the labels in this screen.
COMMAND
Variable Names
Variable Values
Variable Set Button
Previous/Next Page
Buttons
Expand
First
Get
5-2
Variable Values

Figure 5-2 Edit Table Entry

Table 5-1 Edit Table Entry

The first vertical column contains the variable names; these are the names of fields in the
selected table. These names are set by SNMPc and cannot be changed.
Some tables have variable names with an asterisk to the right of the name. These variables
are used as indices into the table. All index variables must be specified to perform a Set
operation.
The second vertical column contains the variable values in pull down list boxes. You can
change the value by typing into the pull down edit box. If the variable has integer aliases
defined in the MIB, you can select an alias by clicking on the down arrow and selecting an
item from the drop down list. You must enter the variable value in the proper format. Use
the expand button (see next section) to view the variable type.
Each variable value has a small Set button to the right. Click this Set button to perform an
SNMP set on only one variable. Set buttons are grayed for variables that are read-only.
Each page shows up to ten variables. The page number and total number of pages are
displayed in the top right corner. Use the >> button to move to the next page and click the
<< button to move to the previous page.
Click the Expand button to expand the view of the active variable value edit box. First click
on the edit box, then select the Expand button.
Click the First button to obtain the first entry of the table from the node. The variable values
will be updated. You do not need to enter index values - they will be ignored.
Click the Get button to obtain the selected table entry. Enter all of the index values to select
a table entry. If you have already displayed an entry, and perhaps modified the value boxes,
you can Click the Get button to refresh the variable values.
Variable Set Button Previous and Next Page Buttons
DESCRIPTION
Expand
First
Get
Next
Set
Set All
Done
Help
Information Formats