Mitsubishi 2010 RVR Owner's Manual page 514

3. Unclamp the cover. Open up the top of the cover and take
out the air cleaner filter.
4. Replacing the air cleaner filter and put the cover back on
in its original position.
NOTE
Genuine Mitsubishi Motors Parts are recommended when
replacing the air cleaner filter.
Make sure that the connector is properly reconnected.
After replacing the air cleaner filter, make sure that the
hinges at the bottom of cover are firmly set.
CAUTION
!
Take care not to scratch the engine air flow sensor
when removing the air cleaner cover.
5. Put the duct and upper cover back on in its original posi-
tion. For details, refer to "Removing and installing the
upper cover and duct" on page 7-18.
Vehicle care and maintenance
7-13
7