Mitsubishi 2010 RVR Owner's Manual page 253

Features and controls
3. Press and hold the multi-information meter switch (for
about 2 seconds or more) to display "ALARM" (rest time
setting).
Type 1
3
4. Lightly press the multi-information meter switch to select
the time until the display appears.
5. Press and hold the multi-information meter switch (for
about 2 seconds or more) to change the setting to the
selected time.
NOTE
If the battery is disconnected, the memory of the unit set-
ting is erased and is automatically set to the "OFF".
The drive time is reset when the ignition switch is in the
"OFF" position or the operation mode is in OFF.
3-156
Type 2
Changing the turn signal sound
It is possible to change the turn signal sound.
1. Press and hold the multi-information meter switch for
about 2 seconds or more to switch from the setting mode
screen to the menu screen.
Refer to "Changing the function settings (With ignition
switch or operation mode is in ON)" on page 3-146.
2. Lightly press the multi-information meter switch to select
. (changing the turn signal sound)
Type 1
Type 2
N00563500041