Mitsubishi 2010 RVR Owner's Manual page 48

2. Before using the rear center seat belt, make sure that the
detachable anchor is securely latched and the seat belt is
not twisted. For details, refer to page 2-23.
3. Grasp the latch plate and slide it up the webbing so that it
easily pulls across your body.
4. Pull the seat belt out slowly while holding the latch plate.
Push the latch plate into the buckle until you hear a
"click". Pull up on the belt to be sure the latch plate is
locked securely in the buckle.
NOTE
If the seat belt locks up and cannot be pulled out, pull it
once with force and let it retract all the way.
Then, pull the belt out slowly once again.
Seat and restraint systems
2
2-21