Mitsubishi 2010 RVR Owner's Manual page 381

Comfort controls
Cooling
For ordinary cooling
5
1. Set the mode selection dial to the "
2. Push the air selection switch (A) to set it to the outside air
position.
3. Push the air conditioning switch (B).
4. Change the temperature by turning the control dial clock-
wise or counterclockwise.
5. Set the desired blower speed.
5-12
NOTE
N00731200308
For quick cooling
" position.
1. Set the mode selection dial to the "
2. Set the temperature control dial to the "MAX A/C" posi-
3. Set the blower speed to the highest position.
If the outside air is dusty or contaminated in some way,
push the air selection switch (A) to set it to the recircula-
tion position. Let in some outside air from time to time for
good ventilation.
To cool the leg areas, set the mode selection dial to the
" " position.
tion.
" position.